View UPA2750GR_1331772.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
PA2750GR
SWITCHING N-CHANNEL POWER MOS FET
DESCRIPTION
The PA2750GR is N-Channel MOS Field Effect Transistor designed for DC/DC converters and power management application of notebook computers.
PACKAGE DRAWING (Unit: mm)
8 5 1 ; Source 1 2 ; Gate 1 7, 8 ; Drain 1 3 ; Source 2 4 ; Gate 2 5, 6 ; Drain 2 1 4 5.37 Max.
+0.10 -0.05
FEATURES
* Dual chip type * Low on-state resistance RDS(on)1 = 15.5 m MAX. (VGS = 10 V, ID = 4.5 A) RDS(on)2 = 21.0 m MAX. (VGS = 4.5 V, ID = 4.5 A) RDS(on)3 = 23.9 m MAX. (VGS = 4.0 V, ID = 4.5 A) * Low Ciss: Ciss = 1040 pF TYP. (VDS = 10 V, VGS = 0 V) * Built-in G-S protection diode * Small and surface mount package (Power SOP8)
6.0 0.3 4.4 0.8
1.8 Max.
1.44
0.15
0.05 Min.
0.5 0.2 0.10
1.27 0.40
0.78 Max. 0.12 M
ORDERING INFORMATION
PART NUMBER PACKAGE Power SOP8
+0.10 -0.05
PA2750GR
ABSOLUTE MAXIMUM RATINGS (TA = 25C, All terminals are connected.)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) Drain Current (pulse)
Note1 Note2 Note2
VDSS VGSS ID(DC) ID(pulse) PT PT Tch Tstg
30 20 9.0 36 1.7 2.0 150 -55 to +150 9.0 8.1
V V A A W W C C A mJ
Gate Body Diode
EQUIVALENT CIRCUIT (1/2 circuit)
Drain
Total Power Dissipation (1 unit) Total Power Dissipation (2 unit) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy
Note3 Note3
IAS EAS
Gate Protection Diode
Source
Notes 1. PW 10 s, Duty cycle 1% 2 2. TA = 25C, Mounted on ceramic substrate of 2000 mm x 2.2 mm 3. Starting Tch = 25C, VDD = 15 V, RG = 25 , VGS = 20 0 V Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. G15780EJ1V0DS00 (1st edition) Date Published March 2002 NS CP(K) Printed in Japan
(c)
2001
PA2750GR
ELECTRICAL CHARACTERISTICS (TA = 25C, All terminals are connected.)
CHARACTERISTICS Zero Gate Voltage Drain Current Gate Leakage Current Gate Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr VDD = 24 V VGS = 10 V ID = 9.0 A IF = 9.0 A, VGS = 0 V IF = 9.0 A, VGS = 0 V di/dt = 100 A/ s TEST CONDITIONS VDS = 30 V, VGS = 0 V VGS = 20 V, VDS = 0 V VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 4.5 A VGS = 10 V, ID = 4.5 A VGS = 4.5 V, ID = 4.5 A VGS = 4.0 V, ID = 4.5 A VDS = 10 V VGS = 0 V f = 1 MHz VDD = 15 V, ID = 4.5 A VGS = 10 V RG = 10 1.5 5 2.0 11 12.5 16.0 17.9 1040 390 130 13 10 43 9 21 3.3 5.1 0.84 34 34 15.5 21.0 23.9 MIN. TYP. MAX. 10 10 2.5 UNIT
A A
V S m m m pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T. RG = 25 PG. VGS = 20 0 V 50
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
L VDD PG. RG
VGS RL VDD VDS
90% 90% 10% 10%
VGS
Wave Form
0
10%
VGS
90%
BVDSS IAS ID VDD VDS
VGS 0 = 1 s Duty Cycle 1%
VDS
VDS
Wave Form
0 td(on) ton
tr
td(off) toff
tf
Starting Tch
TEST CIRCUIT 3 GATE CHARGE
D.U.T. IG = 2 mA PG. 50
RL VDD
2
Data Sheet G15780EJ1V0DS
PA2750GR
TYPICAL CHARACTERISTICS (TA = 25C)
FORWARD TRANSFER CHARACTERISTICS 100 Pulsed VDS = 10 V 40 4.5 V 35 30 25 20 15 10 5 0.01 0 1 2 3 4 5 0 0 Pulsed 0.2 0.4 0.6 0.8 VDS - Drain to Source Voltage - V 1.0 VGS = 10 V 4V DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE
ID - Drain Current - A
1
0.1
TA = -25C 25C 75C 150C
VGS - Gate to Source Voltage - V
ID - Drain Current - A RDS(on) - Drain to Source On-state Resistance - m
10
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
| yfs | - Forward Transfer Admittance - S
100
VDS = 10 V Pulsed
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 50 Pulsed 40 ID = 9.0 A 30 4.5 A
10 TA = 150C 75C 25C -25C
20
1
10
0.1 0.01
0.1
0
1
10
100
0
5
10
15
20
ID - Drain Current - A
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 80 Pulsed 3.0
GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VDS = 10 V ID = 1 mA
VGS(off) - Gate Cut-off Voltage - V
2.5 2.0 1.5 1.0 0.5 0 -75 -50 -25
60
40
20
VGS = 4 V 10 V
4.5 V
0 0.1
1
10
100
0
25
50
75 100 125 150 175
ID - Drain Current - A
Tch - Channel Temperature - C
Data Sheet G15780EJ1V0DS
3
PA2750GR
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 40 Pulsed ID = 4.5 A 100
SOURCE TO DRAIN DIODE FORWARD VOLTAGE
VGS = 10 V
ISD - Diode Forward Current - A
4V 10
0V
30
VGS = 4 V 20
4.5 V
1
10
10 V
0.1
0 -50 -25
0
25
50
75
100 125 150 175
0.01 0 0.5 1.0
Pulsed 1.5
VSD - Source to Drain Voltage - V
Tch - Channel Temperature - C
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000 1000
SWITCHING CHARACTERISTICS
td(on), tr, td(off), tf - Switching Time - ns
Ciss, Coss, Crss - Capacitance - pF
100
tr td(off) td(on)
1000
Ciss Coss
10 tf 1 VDD = 15 V VGS = 10 V RG = 10 1 10 100 ID - Drain Current - A
100
Crss VGS = 0 V f = 1 MHz 1 10 100
10 0.1
0.1 0.1
VDS - Drain to Source Voltage - V
REVERSE RECOVERY TIME vs. DRAIN CURRENT 1000
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 35
VDS - Drain to Source Voltage - V
trr - Reverse Recovery Time - ns
30 25 20 15 10 5 0 0 2 4 6 8 QG - Gate Charge - nC VDS ID = 9 A VDD = 24 V 15 V 6V VGS
12 10 8 6 4 2 0
100
10
1 0.1
1
10
100
10 12 14 16 18 20 22
IF - Drain Current - A
4
Data Sheet G15780EJ1V0DS
VGS - Gate to Source Voltage - V
di/dt = 100 A/ s VGS = 0 V
14
PA2750GR
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA
TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE
PT - Total Power Dissipation - W/package
120
2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 0 20 40 60 80 100 120 140 160 TA - Ambient Temperature - C 2 unit 1 unit Mounted on ceramic substrate of 2000 mm2 x 2.2 mm
dT - Percentage of Rated Power - %
100 80 60 40 20 0
0
20
40
60
80
100 120 140 160
TA - Ambient Temperature - C
FORWARD BIAS SAFE OPERATING AREA 100
) on S( RD GS =
d ite Lim V) 10
ID(pulse)
PW
=1
s
00
ID - Drain Current - A
10
(V
ID(DC)
10
Po we r
1m
s
ms
10
Di ss ipa tio
0m
1
s
nL
im
ite
d
0.1 Mounted on2ceramic substrate
of 2000 mm x 2.2 mm Single Pulse, 1 unit TA = 25C Single Pulse
0.01 0.1
1
10
100
VDS - Drain to Source Voltage - V
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
rth(t) - Transient Thermal Resistance - C/W
1000 Mounted on ceramic substrate 2
of 2000 mm x 2.2 mm Single Pulse, 1 unit TA = 25C
100
Rth(ch-A) = 73.5C/W
10
1
0.1 0.0001
0.001
0.01
0.1
1
10
100
1000
PW - Pulse Width - s
Data Sheet G15780EJ1V0DS
5
PA2750GR
SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD 100 RG = 25 VDD = 15 V VGS = 20 0V Starting Tch = 25C 120
SINGLE AVALANCHE ENERGY DERATING FACTOR RG = 25 9 VDD = 15 V 0V VGS = 20 IAS 9 A
IAS - Single Avalanche Current - A
Energy Derating Factor - %
100 80 60 40 20 0 25 50 75
10
IAS = 9 A
EAS = 8.1 mJ
1 10
100
1m
10 m
100
125
150
L - Inductive Load - H
Starting Tch - Starting Channel Temperature - C
6
Data Sheet G15780EJ1V0DS
PA2750GR
[MEMO]
Data Sheet G15780EJ1V0DS
7
PA2750GR
* The information in this document is current as of March, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of UPA2750GR

	To Download UPA2750GR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .